Tuf-Tite Effluent Filter SOLIDS DEFLECTOR EF-4 SEPTIC TANK GREASE TRAP 4" SCH 40

Description

INSTALLATION
LOCATE THE OUTLET END OF THE SEPTIC TANK
REMOVE TANK LID AND PUMP IF NECESSARY
GLUE THE FILTER HOUSING TO THE 4" OUTLET PIPE OR USE A POLYLOK EXTEND & LOK FITTING IF NOT ENOUGH PIPE EXISTS (SEE MY OTHER LISTINGS) IT WILL FIT SCHEDULE 40 4" PIPE OR WITH THE ADAPTER FIT 4" THINWALL
INSERT THE YELLOW FILTER INTO THE TEE
REPLACE THE SEPTIC TANK LID
MAINTENANCE
THE EF-4 FILTER WILL OPERATE EFFICIENTLY FOR SEVERAL YEARS UNDER NORMAL CONDITIONS BEFORE IT REUIRES CLEANING. IT IS RECOMMENDED THAT THE FILTER BE CLEANED EVERY TIME THE TANK IS PUMPED OR AT LEAST EVERY THREE YEARS.
LOCATE OUTLET END OF SEPTIC TANK AND REMOVE LID
PULL THE YELLOW FILTER OUT OF THE TEE
HOSE OFF THE FILTER OVER THE SEPTIC TANK MAKING SURE ALL SOLIDS FALL BACK IN TANK.
INSERT FILTER BACK INTO TEE, REPLACE LID, AND YOUR DONE!!
I AM IN THE ENVIROMENTAL SUPPLY BUSINESS, I CARRY ALL SIZES OF SEPTIC/GREASE TRAP FILTERS, SEWAGE GRINDER AND EFFLUENT PUMPS, CONCRETE AND FIBERGLASS SEPTIC TANKS FROM 300 TO 5000 GALLONS, SEPTIC AIR PUMPS, FIELD LINE MATERIAL INCLUDING EZ FLOW AND INFILTRATOR AND MOST ANY OTHER ENVIROMENTAL PRODUCTS. THANKS FOR LOOKING AND PLEASE CHECK OUT MY OTHER LISTINGS.
800 GPD
86 ft. of 1/16" Filtration
The EF-4 series filters remove solids down to 1/16" and greatly extend the life of the septic system.
Screws on outside
of Riser, where they
belong, away from
c