Filox Media - 0.5 cu ft

Description

Performa_Softeners
* Fast Shipping
* Sent With a Tracking No.
* Customer Support
Filox Media - 0.5 cu ft
Product Features
0.5 cubic foot Filox*
For removal of iron, hydrogen sulfide (sulfur), and manganese
Removes up to 15 ppm iron
Causes red/orange staining with levels as low as 0.3 ppm. Treats both ferrous (clear water or dissolved) and ferric (red water or oxidized) iron.
Removes up to 7 ppm hydrogen sulfide
The cause of rotten egg odor. Incorrectly referred to as sulfur most of the time.
Removes up to 3 ppm Manganese
Can cause black slime buildup in toilet tanks and may impart a metallic taste to the water
6 GPM/cubic feet Service Flow
Filox* is rated for 6 GPM service flow per FULL CUBIC foot of media
Min. 12 GPM/ft2 Backwash Flow
Filox* requires 12-15 GPM per SQUARE foot of tank area for backwashing
Product Description
Highly refined manganese dioxide provide the highest removal capabilities of iron and hydrogen sulfide without the use of air or chemical injection. Excellent flow rates make Filox* one of the best medias for iron, sulfur, and manganese removal. Amount of media needed can be determined by tank size.
8"x44" Tank - 0.5 cubic foot
9"x48" Tank - 1 cubic foot
10"x54" Tank - 1.5 cubic feet
12"x48" Tank - 2 cubic feet
13"x54" Tank - 3 cubic feet
Note: Sizing not applicable to Air Injection systems. For sizing air injection systems, remove 0.5 cubic foot for your tank size, e.g. a 10"x54" Air Injection system only uses 1 cubic foot of media
More Info
Operation Conditions
Physical Properties
Active Ingredient
Min. 75% Manganese Dioxide
Color
grey-black
Service Flow
6 GPM/cubic feet
Physical Form
Granular
Freeboard
30%-50%
Screen Size
12 x 40
Backwash Rate
12-15 GPM/ft² @ 60°F
Bulk Density
114 lb/cubic feet
Bed Depth
20" Minimum
Odor & Taste
none
pH Range
6.3 - 9.0
Standard Package
1/2 cubic feet bags (57 lb)
Removal Capacity
Life Expectancy
Iron
up to 15ppm
Manufacturer:
Essentially unlimited for low contaminant concentrations
Hydrogen Sulfide
up to 7ppm
Typical Results
4-5 years average dependant on contaminate levels, backwash flow rates, and backwash frequency
Manganese
up to 3ppm
Service Flows
Service flow rate is the manufacturers recommendation for maximum contaminate removal at a constant flow for media alone. Intermittent flow rate and/or lower contaminate levels MAY allow higher treatment flow rates.
Backwash Flow Rates
The backwash flow rate is the minimum rate that MUST be available to ensure proper backwashing and adequate media life. While lower flows can be used and MAY provide adequate results, media life may be significantly reduced.
*Important Note
Filox is the most widely known brand name for filtration media containing a minimum of 75% manganese dioxide. Other brand names shipped may include (but are not limited to): Catalox, Terminox, and MangOx, all containing a minimum of 75% manganese dioxide.
Payment
Shipping
Support
Payment
Shipping
Support
​​​​​​​
We offer
FAST shipping
on all orders!
Your order will be dispatched within 1 to 2 working days of receiving payment (Monday-Friday) and you should expect to receive tracking one or two business days after dispatch.
In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement.
Please contact our experienced and professional staff with questions.  They are eager to help!!!
$Product Features 0.5 cubic foot Filox* For removal of iron, hydrogen sulfide (sulfur), and manganese Removes up to 15 ppm iron Causes red/orange staining with levels as low as 0.3 ppm. Treats both ferrous (clear water or dissolved) and ferric (red water or oxidized) iron. Removes up to 7 ppm hydrogen sulfide The cause of rotten egg odor. Incorrectly referred to as sulfur most of the time. Removes up to 3 ppm Manganese Can cause black slime buildup in toilet tanks and may impart a metallic taste to the water 6 GPM/cubic feet Service Flow Filox* is rated for 6 GPM service flow per FULL CUBIC foot of media Min. 12 GPM/ft2 Backwash Flow Filox* requires 12-15 GPM per SQUARE foot of tank area for backwashing Product Description Highly refined manganese dioxide provide the highest removal capabilities of iron and hydrogen sulfide without the use of air or chemical injection. Excellent flow rates make Filox* one of the best medias for iron, sulfur, and manganese removal. Amount of media needed can be determined by tank size. 8"x44" Tank - 0.5 cubic foot 9"x48" Tank - 1 cubic foot 10"x54" Tank - 1.5 cubic feet 12"x48" Tank - 2 cubic feet 13"x54" Tank - 3 cubic feet Note: Sizing not applicable to Air Injection systems. For sizing air injection systems, remove 0.5 cubic foot for your tank size, e.g. a 10"x54" Air Injection system only uses 1 cubic foot of media More Info Operation Conditions Physical Properties Active Ingredient Min. 75% Manganese Dioxide Color grey-black Service Flow 6 GPM/cubic feet Physical Form Granular Freeboard 30%-50% Screen Size 12 x 40 Backwash Rate 12-15 GPM/ft² @ 60°F Bulk Density 114 lb/cubic feet Bed Depth 20" Minimum Odor & Taste none pH Range 6.3 - 9.0 Standard Package 1/2 cubic feet bags (57 lb) Removal Capacity Life Expectancy Iron up to 15ppm Manufacturer: Essentially unlimited for low contaminant concentrations Hydrogen Sulfide up to 7ppm Typical Results 4-5 years average dependant on contaminate levels, backwash flow rates, and backwash frequency Manganese up to 3ppm Service Flows Service flow rate is the manufacturers recommendation for maximum contaminate removal at a constant flow for media alone. Intermittent flow rate and/or lower contaminate levels MAY allow higher treatment flow rates. Backwash Flow Rates The backwash flow rate is the minimum rate that MUST be available to ensure proper backwashing and adequate media life. While lower flows can be used and MAY provide adequate results, media life may be significantly reduced. *Important Note Filox is the most widely known brand name for filtration media containing a minimum of 75% manganese dioxide. Other brand names shipped may include (but are not limited to): Catalox, Terminox, and MangOx, all containing a minimum of 75% manganese dioxide.
Performa_Softeners
Product Features
0.5 cubic foot Filox*
For removal of iron, hydrogen sulfide (sulfur), and manganese
Removes up to 15 ppm iron
Causes red/orange staining with levels as low as 0.3 ppm. Treats both ferrous (clear water or dissolved) and ferric (red water or oxidized) iron.
Removes up to 7 ppm hydrogen sulfide
The cause of rotten egg odor. Incorrectly referred to as sulfur most of the time.
Removes up to 3 ppm Manganese
Can cause black slime buildup in toilet tanks and may impart a metallic taste to the water
6 GPM/cubic feet Service Flow
Filox* is rated for 6 GPM service flow per FULL CUBIC foot of media
Min. 12 GPM/ft2 Backwash Flow
Filox* requires 12-15 GPM per SQUARE foot of tank area for backwashing
Product Description
Highly refined manganese dioxide provide the highest removal capabilities of iron and hydrogen sulfide without the use of air or chemical injection. Excellent flow rates make Filox* one of the best medias for iron, sulfur, and manganese removal. Amount of media needed can be determined by tank size.
8"x44" Tank - 0.5 cubic foot
9"x48" Tank - 1 cubic foot
10"x54" Tank - 1.5 cubic feet
12"x48" Tank - 2 cubic feet
13"x54" Tank - 3 cubic feet
Note: Sizing not applicable to Air Injection systems. For sizing air injection systems, remove 0.5 cubic foot for your tank size, e.g. a 10"x54" Air Injection system only uses 1 cubic foot of media
More Info
Operation Conditions
Physical Properties
Active Ingredient
Min. 75% Manganese Dioxide
Color
grey-black
Service Flow
6 GPM/cubic feet
Physical Form
Granular
Freeboard
30%-50%
Screen Size
12 x 40
Backwash Rate
12-15 GPM/ft² @ 60°F
Bulk Density
114 lb/cubic feet
Bed Depth
20" Minimum
Odor & Taste
none
pH Range
6.3 - 9.0
Standard Package
1/2 cubic feet bags (57 lb)
Removal Capacity
Life Expectancy
Iron
up to 15ppm
Manufacturer:
Essentially unlimited for low contaminant concentrations
Hydrogen Sulfide
up to 7ppm
Typical Results
4-5 years average dependant on contaminate levels, backwash flow rates, and backwash frequency
Manganese
up to 3ppm
Service Flows
Service flow rate is the manufacturers recommendation for maximum contaminate removal at a constant flow for media alone. Intermittent flow rate and/or lower contaminate levels MAY allow higher treatment flow rates.
Backwash Flow Rates
The backwash flow rate is the minimum rate that MUST be available to ensure proper backwashing and adequate media life. While lower flows can be used and MAY provide adequate results, media life may be significantly reduced.
*Important Note
Filox is the most widely known brand name for filtration media containing a minimum of 75% manganese dioxide. Other brand names shipped may include (but are not limited to): Catalox, Terminox, and MangOx, all containing a minimum of 75% manganese dioxide.
Filox Media - 0.5 cu ft
* Fast Shipping
* Sent With a Tracking No.
* Customer Support
Payment
​​​​​​​
Shipping
We offer
FAST shipping
on all orders!
Your order will be dispatched within 1 to 2 working days of receiving payment (Monday-Friday) and you should expect to receive tracking one or two business days after dispatch.
In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement.
Support
Please contact our experienced and professional staff with questions.  They are eager to help!!!
Product Features
0.5 cubic foot Filox*
For removal of iron, hydrogen sulfide (sulfur), and manganese
Removes up to 15 ppm iron
Causes red/orange staining with levels as low as 0.3 ppm. Treats both ferrous (clear water or dissolved) and ferric (red water or oxidized) iron.
Removes up to 7 ppm hydrogen sulfide
The cause of rotten egg odor. Incorrectly referred to as sulfur most of the time.
Removes up to 3 ppm Manganese
Can cause black slime buildup in toilet tanks and may impart a metallic taste to the water
6 GPM/cubic feet Service Flow
Filox* is rated for 6 GPM service flow per FULL CUBIC foot of media
Min. 12 GPM/ft2 Backwash Flow
Filox* requires 12-15 GPM per SQUARE foot of tank area for backwashing
Product Description
Highly refined manganese dioxide provide the highest removal capabilities of iron and hydrogen sulfide without the use of air or chemical injection. Excellent flow rates make Filox* one of the best medias for iron, sulfur, and manganese removal. Amount of media needed can be determined by tank size.
8"x44" Tank - 0.5 cubic foot
9"x48" Tank - 1 cubic foot
10"x54" Tank - 1.5 cubic feet
12"x48" Tank - 2 cubic feet
13"x54" Tank - 3 cubic feet
Note: Sizing not applicable to Air Injection systems. For sizing air injection systems, remove 0.5 cubic foot for your tank size, e.g. a 10"x54" Air Injection system only uses 1 cubic foot of media
More Info
Operation Conditions
Physical Properties
Active Ingredient
Min. 75% Manganese Dioxide
Color
grey-black
Service Flow
6 GPM/cubic feet
Physical Form
Granular
Freeboard
30%-50%
Screen Size
12 x 40
Backwash Rate
12-15 GPM/ft² @ 60°F
Bulk Density
114 lb/cubic feet
Bed Depth
20" Minimum
Odor & Taste
none
pH Range
6.3 - 9.0
Standard Package
1/2 cubic feet bags (57 lb)
Removal Capacity
Life Expectancy
Iron
up to 15ppm
Manufacturer:
Essentially unlimited for low contaminant concentrations
Hydrogen Sulfide
up to 7ppm
Typical Results
4-5 years average dependant on contaminate levels, backwash flow rates, and backwash frequency
Manganese
up to 3ppm
Service Flows
Service flow rate is the manufacturers recommendation for maximum contaminate removal at a constant flow for media alone. Intermittent flow rate and/or lower contaminate levels MAY allow higher treatment flow rates.
Backwash Flow Rates
The backwash flow rate is the minimum rate that MUST be available to ensure proper backwashing and adequate media life. While lower flows can be used and MAY provide adequate results, media life may be significantly reduced.
*Important Note
Filox is the most widely known brand name for filtration media containing a minimum of 75% manganese dioxide. Other brand names shipped may include (but are not limited to): Catalox, Terminox, and MangOx, all containing a minimum of 75% manganese dioxide.